Mac’s Tie-Downs vs. The Competition

Oh, Snap!

Colin McLemore of Mac’s Tie-Downs took on the competition to prove the superior strength of Mac’s products. See what the breaking point was for the generic tie-down strap.

Mac's Tie-Down Strap

Mac's Tie-Down Strap

He purchased a generic 1-inch tie-down strap from a big-box store and tested its maximum breaking strength against a Mac’s 1-inch tie-down strap. Here’s what happened:

Mac’s Tie-Down Strap vs. The Competition

In the end, the more expensive, generic 1-inch tie-down strap failed at 1,500 pounds, while the Mac’s 1-inch tie-down strap exceeded 3,600 pounds.

Mac’s Tie-Down Straps

Mac’s standard 1-inch tie-downs start at $9.95 for the 6-foot long version and can be ordered with S-hooks, flat-snap-hook system, cam buckles, and more. Here are some of the popular choices:

Mac's Tie-Down Strap

S-Hook

The S-hook option consists of a heavy-duty 3/8-inch-diameter steel wire hook. This option is favored for its simplicity and ability to attach to metal rails or other locations where a captive hook would not otherwise work.

S-Hook with Keeper

The S-hook with Keeper option consists of the same heavy-duty 3/8″ diameter steel wire, but with the addition of a spring-loaded trap for keeping the hook connected.

Rachet Tensioner

The ratchet tensioner is recommended for heavier applications, such as for the transport of heavy motorcycles, small recreational vehicles or building materials and lumber. The ratchet handle allows for higher tension with improved slip resistance.

Mac's Tie-Down Strap

Cam Buckle

The cam buckle offers a low-profile tensioner that cinches quicker and is ideal for cargo that might be damaged by excessive tension, such as kayaks or other thin-walled equipment.

Flat Snap Hook

The flat-snap-hook system consists of spring-loaded captive hooks at each end. This attachment style offers the advantage of preventing the strap from disconnecting even when slack develops. This makes securing cargo easier and is an added measure of safety for the journey.

Mac's Tie-Down Strap

UTV Tie-Down Pack ($149.95)

The weight of a UTV demands a more robust tie-down solution. Mac’s has a UTV Tie-Down Pack with increased holding capacity, but at a cost lower than the car tie-down kit. The pack includes four 8-foot-long straps, each rated to a 5,000-lb minimum breaking strength. For more UTV options, such as the UTV wheel nets pictured below, visit Mac’s website.

Mac's Tie-Down Strap

COMPANY DETAILS

Mac's Custom Tie-Downs logo

Company

Mac's Custom Tie-Downs

Website

macscustomtiedowns.com

Connect

Email

tech@macstiedowns.com

Phone

(800) 666-1586

Address

P.O. Box 1140

Sagle, ID USA 83860

ABOUT Mac's Custom Tie-Downs®

Mac's Custom Tie-Downs was started back in 1993 when Colin McLemore realized there was a need for high-quality tie-down systems for trailers and truck beds. Through much engineering research and talking with both trailer manufacturers and users of tie-downs, the company developed their patented VersaTie Tracks and Connectors. These superior quality tie-down systems and components are used by the best trailer builders in the country, and can be found at virtually any motorsport event. Mac's Tie-Downs now has a complete line of track, connectors, deck and specialty hardware and a complete line of tie-down straps.

COMPANY VIDEO